How to Guide - Microdermabrasion Facial Kit

Before using the product

  • Make sure the device is fully charged
  • Keep the device clean and dry
  • Keep your hands dry when using the product
  • Ensure the cotton filter and the filter plug are installed properly
  • Do not use on cuts / bruises
Refer to the maintenance of the product here

    Step 1 - Patch test on your skin (Using for the first time)

    • Use the Micro-crystalline head attachment for the testing
    • It is recommended to first use on the back of your hand
    • Start with the lowest power level and gently glide over the skin
    • Allow at least 5 - 10 minutes and see how your skin reacts
    • Once you are satisfied that treatments are comfortable on your skin, proceed with the facial treatment

    Step 2 - Cleanse your skin

    • Cleanse your face to remove any make up and surface dirt from your skin and pat dry¬†

    Step 3 - Steam to open pores

    Using Lux Fem steamer to open the pores
    • Use a facial steamer¬†or a warm towel 8 - 10 minutes on your face to open pores

    Step 4 - Selecting the head attachments

    Lux Fem microdermabrasion kit replaceable heads for facial treatments

    Micro-crystalline head - Microdermabrasion
    Micro-crystalline particles in the tip exfoliates and removes the dry / dead skin layer leaving the skin smoother and rejuvenated
    Start with this attachment for microdermabrasion treatment 


    Small Circular head
    Ideal to use on hard-to-reach areas of skin and suitable for sensitive skin
    Creates focused suction to remove blackheads, whiteheads and acne


    Oval head
    Unique shape creates stronger vacuum pressure
    Used to remove deeper blackheads and toxins from the skin
    Promotes blood and lymphatic circulation
    Suitable for skin lifting, reduce fine lines and wrinkles

    Step 5 - Power selection

    • Single button operation
      • Switch on / Power up - Single press
      • Switch off - Long press
      • Suction and release mode - Single press to¬†select the power level then double press to activate
    Lux Fem Microdermabrasion handset power selection
    • Always start with the lowest suction level
    • For microdermabrasion (Micro-crystalline head)
      • It is recommended to use only up to level 2 on sensitive skin
      • For ultra sensitive skin use only the lowest suction level. You will get best results with several treatments
      • Level 3 and 4¬†should be used on non-sensitive skin surfaces such as the neck
    • General guidelines (Small circular head and Oval head)
      • Level 1: Ultra sensitive and sensitive skin
      • Level 2: Sensitive and dry skin
      • Level 3: Normal skin - neither dry nor oily
      • Level 4: Combination skin and oily skin
    • Increase the power with care when treating stubborn blackheads using the Oval head. The unique shape creates a strong suction power
    • Lux Fem comes with the Suction and Release mode which operates at 4 second intervals. Use this to stop over using on one area or until you get used to the device
    You can use one 4 second session for one glided stroke. Then use the next 4 second session in a different area

       Step 6 - Treatment

      Microdermabrasion

      • Use the Micro-crystalline head attachment
      • Start with the lowest suction level
      • Do not use in one area for over 2 seconds
      • Pull the skin away slightly and gently with your free hand so the skin surface is stretched. This makes it easy to glide the suction tip
      • Keep the tip on skin surface and gently glide in an upward motion
      • Start from the jawline and work upwards along the natural lines on your face
      Microdermabraision usage

      Important

      • Do not use if you feel pain as it is a result of using high pressure or suction power level. Treat facial skin gently and with care
      • Do not use on the skin under the eye
      • Do not apply pressure on the skin
      • Do not treat the same area twice

      Pore dirt removal and fine line care

      • Use the Small Circular head attachment to remove blackheads, whiteheads, acne and pore dirt
      • Start with the lowest suction level and increase as necessary according to your skin type and requirement
      • Use the suction on one blackhead (or whitehead) at a time.
      • Do not use in one area over 3 seconds
      • Work on the hard to reach areas using the small circular head such as nose, chin and jawline
      • Keep the tip on skin surface and gently glide in an upward motion
      • Use the Oval head on stubborn blackheads
      • For fine lines care, use the oval head and work in an upward motion. This massages the skin and improves blood circulation releasing higher levels of elastin and collagen to promote skin rejuvenation
      Fine lines care allowable area
        Fine lines care facial skin spots

        Step 7 - After care

          • Rinse your face with cold water (not too cold) or with a cold facial towel to tighten the opened pores
          • Mild¬†redness of the skin usually resolves within minutes to hours after microdermabrasion. Apply moisturiser to keep skin hydrated after the treatment
          • Use mild sunscreen for protection as your skin will be very sensitive to sun after exfoliation
          Important
          • Avoid using topical acne medications for at least one day after treatment
          • Highly recommended to use skin care products which are fragrance-free and non-comedogenic
          Microdermabrasion can be done as frequently as weekly or up to every 4-6 weeks depending on your skin's tolerance and desired cosmetic effects
          Always take good care of your skin and treat it gently!
          Apply gentle skin care products

          How to guide - Cupping Massage

          Check out how to guide on cupping massage function here

          More importantly Share your results

          If you are happy with Lux Fem Skin care, take a selfie ūü§≥ in your ‚ú® glowing skin and send to us to be featured in our social media!
          Or tag us #luxfemaus ūüėä

          BUY NOW